Fujitsu Aircon Servicing Singapore

Fujitsu Aircon Service, Repair and Chemical Wash in Singapore

Billy Aircon services Fujitsu aircon across Singapore. We have served Singapore since 2003, work island-wide, and are open Monday to Saturday from 9am to 6pm with no call-out fee. Our technicians are licensed, including for R32 refrigerant handling.

We are not an authorised Fujitsu dealer, but our licensed technicians handle Fujitsu units to the same standard as every other brand we work on. Every job comes with a 90-day workmanship warranty. If something is not right, we re-fix it free. Pricing is clear, with no hidden fees, no middlemen and no call-out fee.

About the Fujitsu General Brand

Fujitsu General is a respected Japanese aircon manufacturer with a growing presence in the Singapore market. While not as widely installed as Daikin or Mitsubishi, Fujitsu aircons have earned a loyal following among Singapore homeowners and businesses who value their quiet operation, solid build quality, and reliable inverter compressor technology. Fujitsu General - the air conditioning division of the Fujitsu group - brings decades of Japanese engineering expertise to their residential and commercial cooling systems.

Billy Aircon is a licensed aircon servicing company in Singapore established in 2003 with a team of 26 technicians. We service and repair Fujitsu aircon units across Singapore regularly. Our technicians are experienced with the full range of Fujitsu General models, from standard wall-mounted single-split ASYG/AOYG systems to multi-split configurations and the newer Airstage platform. We understand the engineering specifics of Fujitsu’s inverter compressors, control board architecture, and refrigerant systems. This expertise allows us to diagnose issues accurately and complete repairs efficiently for residential HDB flats, condos, and landed homes as well as commercial offices and retail spaces.

Most Fujitsu systems in Singapore use R410A refrigerant, though newer models are transitioning to R32. Our technicians are certified to handle both refrigerant types and carry the appropriate gauges, recovery equipment, and gas supplies for each.

Models and Systems We Service

We service every Fujitsu General aircon model available in Singapore, including discontinued and legacy systems. Here are the models we work on most frequently.

Fujitsu Airstage Series

The Airstage platform is Fujitsu General’s latest residential and light commercial aircon line. Airstage systems use advanced inverter compressor technology with precise temperature control and low noise operation. The Airstage range includes wall-mounted, floor-standing, ceiling cassette, and ducted configurations. During servicing, we pay attention to the Airstage’s high-efficiency evaporator coil design, which has closely spaced aluminium fins that can trap dust and lint more readily than coils with wider fin spacing. Thorough cleaning is essential to maintain the unit’s rated efficiency.

Fujitsu ASYG/AOYG Models

The ASYG (indoor) and AOYG (outdoor) model designations cover Fujitsu General’s core range of wall-mounted split systems. These units are installed in thousands of Singapore homes and office spaces. The ASYG indoor units feature clean, simple designs with easy-access filters and intuitive remote controls. Servicing these units involves cleaning the multi-layer filters, washing the evaporator coil, flushing the drain system, and checking the outdoor AOYG unit’s condenser coil and compressor operation.

Fujitsu Multi-Split Systems

Fujitsu General offers multi-split systems that connect multiple indoor units to a single outdoor compressor. These are an efficient solution for Singapore condos and apartments with limited outdoor space for condensers. Multi-split systems require careful servicing because the refrigerant must be distributed evenly across all connected indoor units. We check each indoor unit individually and verify that the system is balanced, as an imbalance causes uneven cooling between rooms.

Fujitsu Ceiling Cassette and Ducted Systems

For larger residential spaces and commercial properties in Singapore, Fujitsu provides ceiling cassette and ducted aircon systems. Ceiling cassettes are flush-mounted in the ceiling and distribute air in four directions. Ducted systems are fully concealed with air delivered through ceiling grilles. Both require specialised servicing that accounts for the more complex installation and larger coil surfaces. We bring the appropriate cleaning equipment and access tools for these commercial-grade units.

Common Aircon Problems and Repairs

Singapore’s tropical climate creates relentless operating conditions for all aircon systems. Here are the issues we encounter most frequently with Fujitsu units.

Water Leaking from Indoor Unit

Water dripping from a Fujitsu indoor unit is the most common service request we receive for this brand. In Singapore’s high humidity environment, the evaporator coil produces substantial condensation that must drain away continuously. When the drain pan outlet or drain hose becomes clogged with algae, slime, or debris, water accumulates and eventually overflows from the unit. We clear the blockage, flush the entire drain path with anti-bacterial solution, and verify proper drainage flow. For units installed with a drain pump, we test pump operation and clean the pump reservoir.

Fujitsu Aircon Not Cold

When your Fujitsu aircon is not blowing cold air, several factors could be at play. A dirty evaporator coil restricts heat absorption, causing the supply air to feel warm. Low refrigerant gas from a leak in the piping system means the unit cannot transfer enough heat. A malfunctioning inverter board may prevent the compressor from ramping up to full capacity. We use a systematic diagnostic approach to identify the exact cause before recommending a solution, whether that is cleaning, a gas top-up, or a component repair.

Fujitsu Error Codes

Fujitsu General aircons communicate faults through error codes displayed on the remote control or by flashing LED patterns on the indoor unit. Common codes include EE:EE (a general error that requires reading the specific sub-code from the indoor unit’s LED), error 01 (indoor/outdoor communication fault), error 06 (inverter compressor overcurrent), and error 09 (outdoor thermistor fault). Our technicians are trained to interpret Fujitsu error codes and LED flash sequences. When you report an error code, we can often pre-diagnose the issue and arrive prepared with the right parts.

Compressor Not Engaging

A Fujitsu outdoor unit compressor that fails to start can be caused by several issues. A tripped thermal overload protector, faulty start capacitor, damaged inverter board, or high-pressure switch activation can all prevent the compressor from engaging. In Singapore, outdoor units exposed to direct sunlight or squeezed into poorly ventilated condenser ledges are prone to overheating, which triggers the thermal protection circuit. We inspect the electrical system, test each component, and check the installation environment.

Fan Motor Noise or Failure

The indoor fan motor in a Fujitsu unit can develop bearing wear over time, especially in Singapore where aircons run for extended hours daily. Worn bearings produce a grinding or whining sound that worsens as the motor deteriorates. If left unaddressed, the motor will eventually fail completely, stopping airflow from the indoor unit. We carry common Fujitsu fan motor replacements and can usually complete the swap in a single visit.

Refrigerant Leak at Flare Connections

Fujitsu systems, like all split aircons, use flared copper pipe connections between the indoor and outdoor units. Over time, these flare joints can develop micro-leaks due to vibration, thermal expansion cycles, or improper original installation. A slow refrigerant leak causes gradual loss of cooling capacity. We use electronic leak detectors and bubble solution to locate leaks at flare connections. Once found, we re-flare the joint, pressure test the repair, and top up the system with the correct amount of R410A or R32 refrigerant.

Why Billy Aircon for Your Fujitsu Unit

Billy Aircon has serviced Fujitsu General aircon units across Singapore since 2003. With over 15,000 service jobs completed across all major brands, our 26-person team has accumulated substantial experience with Fujitsu systems through regular service calls in both residential and commercial properties. We understand the specific characteristics of Fujitsu’s inverter compressor control logic, the layout of their indoor unit PCB boards, and the refrigerant charge specifications for each ASYG/AOYG model combination.

We stock commonly needed Fujitsu replacement parts, including thermistors, fan motors, capacitors, and PCB boards. For less common components, we source through Fujitsu General Singapore’s supply channels. Our goal is always to complete aircon repairs in a single visit to minimise disruption to our customers. We also assist with Fujitsu aircon installation for new units and system replacements.

Our Fujitsu servicing coverage spans the entire island of Singapore, from Bedok and Tampines in the east to Jurong in the west, and from Woodlands in the north to the CBD. We work in HDB estates, condos, landed properties, offices, retail spaces, and industrial buildings. We handle all property access challenges, from narrow condenser ledges in high-rise condos to ceiling-mounted fan coil units in commercial spaces.

Servicing Packages and Pricing

We offer comprehensive servicing for all Fujitsu General aircon models at fair, transparent prices (2026 rates below).

Standard Servicing - from $16 per unit

Standard servicing for Fujitsu aircon includes filter cleaning, evaporator coil cleaning, drain pan flushing, condensate drain clearing, fan blower cleaning, and outdoor unit inspection. We measure the temperature differential between supply and return air to verify cooling performance and check the compressor’s operating current against Fujitsu’s specifications. This service is recommended every 3 months in Singapore.

See our complete servicing price list for pricing details.

Chemical Wash - $80 to $100 per Unit

A chemical wash is recommended when standard servicing is insufficient to restore your Fujitsu aircon’s cooling performance. The chemical cleaning process dissolves stubborn mould, bacteria, and grime deposits from the fan coil unit, evaporator coil, and fan blower that normal cleaning cannot remove. This is especially effective for Fujitsu units with tightly spaced coil fins, where contaminants can become deeply embedded in Singapore’s humid conditions. For units not serviced in over 6 months, a full-dismantle chemical overhaul ($130 to $180) provides a deeper clean of every internal component.

Gas Top-Up - From $80

If your Fujitsu aircon is running low on R410A or R32 refrigerant, we provide precise gas top-up services. We use calibrated digital manifold gauges to achieve the exact refrigerant charge specified by Fujitsu General for your model. A leak inspection is always performed before adding gas - refilling a leaking system is a temporary fix that wastes money and harms the environment.

Repairs and Parts Replacement

We handle all Fujitsu aircon repairs, from simple filter replacements to complex inverter board diagnostics. Common repairs include fan motor replacement, thermistor replacement, PCB board repair, capacitor replacement, and drain pump servicing. Every repair is backed by our 90-day workmanship warranty on parts and labour, giving you peace of mind after each service visit.

How We Compare